Quantitative analysis of polystyrene microplastic and styrene monomer released from plastic food containers.

Since the COVID-19 outbreak, the use of disposable plastics has rapidly increased along with the amount of plastic waste. During fragmentation, microplastics and other chemical substances contained in plastics are released. These then enter humans through food which could be problematic considering their hazardous potential. Polystyrene (PS), which is widely used in disposable containers, releases large amounts of microplastics (MPs), but no studies have investigated the release mechanisms of PS-MPs and simultaneously exposed contaminants. Therefore, in this study, the effects of pH (3, 5, 7, and 9), temperature (20, 50, 80, and 100 °C), and exposure time (2, 4, 6, and 8 h) on MPs release were systematically examined. A quantitative/qualitative study of MPs and styrene monomers was performed using microscopy-equipped Fourier-transformed infrared spectroscopy and gas chromatography-mass spectrometry. The release of PS-MPs (36 items/container) and simultaneously exposed pollutants (SEP), such as ethylene glycol monooleate (EGM), was highest at pH 9, 100 °C, and 6 h, which was proportional to the test temperature and time. Under the same conditions, 2.58 µg/L of styrene monomer migrated to the liquid food simulants. The fragmentation was proceeded by oxidation/hydrolysis and accelerated by increased temperature and exposure time. The strong positive correlation between PS-MPs and SEPs releases at pH and temperature indicates that PS-MPs and SEPs follow the same release process. However, a strongly negative correlation between PS-MPs and styrene monomers at the exposed time shows that styrene migration does not follow the same release process, but does its partition coefficient.

CO2-mediated thermal treatment of disposable plastic food containers

In accordance with global economic prosperity, the frequencies of food delivery and takeout orders have been increasing. The pandemic life, specifically arising from COVID-19, rapidly expanded the food delivery service. Thus, the massive generation of disposable plastic food containers has become significant environmental problems. Establishing a sustainable disposal platform for plastic packaging waste (PPW) of food delivery containers has intrigued particular interest. To comprise this grand challenge, a reliable thermal disposable platform has been suggested in this study. From the pyrolysis process, a heterogeneous plastic mixture of PPW was converted into syngas and value-added hydrocarbons (HCs). PPW collected from five different restaurants consisted of polypropylene (36.9 wt%), polyethylene (10.5 wt%), polyethylene terephthalate (18.1 wt%), polystyrene (13.5 wt%), polyvinyl chloride (4.2 wt%), and other composites (16.8 wt%). Due to these compositional complexities, pyrolysis of PPW led to formations of a variety of benzene derivatives and aliphatic HCs. Adapting multi-stage pyrolysis, the different chemicals were converted into industrial chemicals (benzene, toluene, styrene, etc.). To selectively convert HCs into syngas (H2 and CO), catalytic pyrolysis was adapted using supported Ni catalyst (5 wt% Ni/SiO2). Over Ni catalyst, H2 was produced as a main product due to CH bond scission of HCs. When CO2 was used as a co-reactant, HCs were further transformed to H2 and CO through the chemical reactions of CO2 with gas phase HCs. CO2-assisted catalytic pyrolysis also retarded catalyst deactivation inhibiting coke deposition on Ni catalyst.

COVID-19 mask waste to energy via thermochemical pathway: Effect of Co-Feeding food waste.

In this study, co-pyrolysis of single-use face mask (for the protection against COVID-19) and food waste was investigated for the purpose of energy and resource valorization of the waste materials. To this end, disposable face mask (a piece of personal protective equipment) was pyrolyzed to produce fuel-range chemicals. The pyrolytic gas evolved from the pyrolysis of the single-use face mask consisted primarily of non-condensable permanent hydrocarbons such as CH4, C2H4, C2H6, C3H6, and C3H8. An increase in pyrolysis temperature enhanced the non-condensable hydrocarbon yields. The pyrolytic gas had a HHV of >40 MJ kg-1. In addition, hydrocarbons with wider carbon number ranges (e.g., gasoline-, jet fuel-, diesel-, and motor oil-range hydrocarbons) were produced in the pyrolysis of the disposable face mask. The yields of the gasoline-, jet fuel-, and diesel-range hydrocarbons obtained from the single-use mask were highest at 973 K. The pyrolysis of the single-use face mask yielded 14.7 wt% gasoline-, 18.4 wt% jet fuel-, 34.1 wt% diesel-, and 18.1 wt% motor oil-range hydrocarbons. No solid char was produced via the pyrolysis of the disposable face mask. The addition of food waste to the pyrolysis feedstock led to the formation of char, but the presence of the single-use face mask did not affect the properties and energy content of the char. More H2 and less hydrocarbons were produced by co-feeding food waste in the pyrolysis of the disposable face mask. The results of this study can contribute to thermochemical management and utilization of everyday waste as a source of energy.

Valorization of disposable COVID-19 mask through the thermo-chemical process.

It becomes common to wear a disposable face mask to protect from coronavirus disease 19 (COVID-19) amid this pandemic. However, massive generations of contaminated face mask cause environmental concerns because current disposal processes (i.e., incineration and reclamation) for them release toxic chemicals. The disposable mask is made of different compounds, making it hard to be recycled. In this regard, this work suggests an environmentally benign disposal process, simultaneously achieving the production of valuable fuels from the face mask. To this end, CO2-assisted thermo-chemical process was conducted. The first part of this work determined the major chemical constituents of a disposable mask: polypropylene, polyethylene, nylon, and Fe. In the second part, pyrolysis study was employed to produce syngas and C1-2 hydrocarbons (HCs) from the disposable mask. To enhance syngas and C1-2 HCs formations, multi-stage pyrolysis was used for more C-C and C-H bonds scissions of the disposable mask. Catalytic pyrolysis over Ni/SiO2 further expedited H2 and CH4 formations due to its capability for dehydrogenation. In the presence of CO2, catalytic pyrolysis additionally produced CO, while pyrolysis in N2 did not produce it. Therefore, the thermo-chemical conversion of disposable face mask and CO2 could be an environmentally benign way to remove COVID-19 plastic waste, generating value-added products.